Bu Glock red dot mount with backup sights combines a universal multi-footprint optic plate with built-in fiber optic iron sights. Fit a micro red dot, and you still have a front post and rear notch on the plate itself, so you keep a usable sight picture if the optic battery runs flat. It is the stainless steel, fiber-sight upgrade of our universal Glock red dot adapter plate. You can also compare the Glock RMR mount plate or browse all kırmızı nokta nişangahları.
Why Choose This Glock Red Dot Mount with Backup Sights?
A red dot speeds up target acquisition, but a flat battery or a fogged lens can leave you with no sight at all. For that reason, this plate carries its own front post and rear notch sights with bright fiber optic inserts. As a result, you have a fallback aiming reference without adding a separate set of suppressor-height sights.
In addition, the multi-hole pattern accepts several popular micro red dot footprints. That means one plate can stay on the pistol even if you change optics later.
Key Features of the Glock Red Dot Mount
- Built-in backup sights: front post and rear notch sights with fiber optic inserts, mounted directly on the plate.
- Universal footprint pattern: drilled and tapped holes for several common micro red dot footprints.
- Stainless steel body: a rigid stainless steel plate with a black finish.
- Düşük profil: 3.4 mm plate thickness keeps the optic close to the slide.
- Dovetail key: a machined key locates the plate in the rear sight dovetail, so no slide milling is needed.
- Complete kit: countersunk mounting screws, set screws and two hex keys are included.
Red Dot Footprint Compatibility
The supplier lists the plate as compatible with the following optic footprints:
- Trijicon RMR
- Leupold DeltaPoint
- Vortex Venom
- Burris FastFire II and III
- EOTech MRDS
- Doctor Sight II Plus
The plate is made for Glock pistols with a standard rear sight dovetail. Because slide and optic dimensions can vary, check your pistol and optic against the dimensions below before ordering.
Teknik Özellikler
| Ürün | Universal red dot mount plate with fiber optic backup sights |
|---|---|
| Malzeme | Stainless steel |
| Renk | Siyah |
| Overall length | 67.6 mm |
| Optic deck length | 59.5 mm |
| Width | 22.7 mm |
| Plate thickness | 3.4 mm |
| Dovetail key width | 6.4 mm |
| Fiber color | Green or red, supplied at random |
Kutu İçeriği
- 1 × Glock red dot mount plate with fiber optic backup sights
- Countersunk mounting screws
- Set screws
- 2 × hex keys
How to Install the Glock Optic Mount Plate
- Öncelikle tabancayı boşaltın, şarjörü çıkarın ve haznenin boş olduğunu doğrulayın.
- Drift out the factory rear sight with a sight pusher or punch.
- Slide the plate’s dovetail key into the rear sight dovetail and center it on the slide.
- Then secure the plate with the set screws, using a drop of medium thread locker.
- Fit your red dot to the matching hole pattern, tighten the screws evenly and zero the optic at the range.
If you do not have a sight pusher, a qualified gunsmith can fit the plate for you.
Glock Red Dot Mount with Backup Sights FAQ
What color are the fiber optic sights?
The plate is supplied with either green or red fiber inserts. The color is random and cannot be selected.
Does it replace my rear sight?
Yes. The plate installs in the rear sight dovetail in place of the factory rear sight, and it carries its own backup sights.
Can I switch to a different red dot later?
Yes. Because the plate has holes for several footprints, you can move to another supported optic without buying a new plate.
Glock, Trijicon RMR, Leupold DeltaPoint, Vortex Venom, Burris FastFire, EOTech MRDS and Doctor Sight are trademarks of their respective owners and are used for compatibility reference only. This is an aftermarket accessory and is not affiliated with or endorsed by any of these companies.
Yorumlar
Henüz yorum yok.